Instruction manual

Installing In-Sight
®
5000 Series Vision Sensors
37
1. Expected repeatability between cameras. This equates to ~ ±17 pixels on a 640 x 480 resolution camera, ~ ±27 pixels on
a 1024 x 768 resolution camera and ~ ±29 pixels on a 1600 x 1200 resolution camera.
Communications Network 1 Ethernet port, 10/100 BaseT, TCP/IP protocol. Supports DHCP (factory default) or static IP
address.
Serial RS-232C (4800 to 115,200 baud rates; 1200 to 115,200 baud rates when connected to a 1450/
1460 I/O Expansion Module).
Power 24VDC ±10%, 350mA
maximum.
24VDC ±10%, 500mA
maximum.
24VDC ±10%, 350mA
maximum.
Mechanical Material ASTM 316L Stainless Steel.
Finish Electropolish Passivated.
Mounting Four M4 threaded mounting holes on back of sensor.
Dimensions 91.7mm (3.61in) x 124.4mm (4.90in) x 61.4mm (2.42in) with Lens Cover installed.
41.4mm (1.63in) x 124.4mm (4.90in) x 61.4mm (2.42in) without Lens Cover installed.
Weight 675 g (24 oz.) Lens cover not installed, without lens.
907 g (32 oz.) Lens cover installed, without lens.
Environmental Temperature 0°C (32°F) to 45°C (113°F) (Operating),
-30°C (-22°F) to 80°C (176°F) (Storage)
Humidity 95%, non-condensing (Operating and Storage)
Protection IP68 (with appropriate Lens Cover properly installed).
Shock 80 G Shock with 150 gram lens attached per IEC 68-2-27.
Vibration 10 G from 10-500 Hz with 150 gram lens per IEC 68-2-6.
Regulatory Compliance CE, UL, CUL, FCC
Table 5-2: Stainless Steel Sensor Specifications (Continued)
Specification In-Sight 5400CS In-Sight 5403S In-Sight 5400S