Instruction manual

Specifications
36
5.1.2 Stainless Steel Vision Sensor Specifications
Table 5-2: Stainless Steel Sensor Specifications
Specification In-Sight 5400CS In-Sight 5403S In-Sight 5400S
Performance Class
Minimum Firmware Requirement In-Sight version 2.80.01 PR1
Memory Job/Program 32MB non-volatile flash memory; unlimited storage via remote network device.
Image
Processing
64MB
Image Sensor 1/3-inch CCD 1/1.8-inch CCD 1/3-inch CCD
Optical
Properties
6mm diagonal,
7.4 x 7.4µm sq. pixels
8.923mm diagonal,
4.4 x 4.4µm sq. pixels
6mm diagonal,
7.4 x 7.4µm sq. pixels
Resolution
(pixels)
640 x 480 1600 x 1200 640 x 480
Electronic
Shutter Speed
16µs to 1000ms 27µs to 1000ms 16µs to 1000ms
Acquisition Rapid reset, progressive scan, full-frame integration.
24 bit color 256 gray levels (8 bits/pixel)
Gain/Offset controlled by software.
40 full frames per second at
8ms exposure.
13 full frames per second at
8ms exposure.
40 full frames per second at
8ms exposure.
Lens Type C-mount
Image
Repeatability
1
±0.005in (.0127mm), (both x and y) from lens C-mount axis to center of imager.
I/O Trigger 1 opto-isolated, acquisition trigger input.
Remote software commands via Ethernet and RS-232.
Discrete Inputs 8 inputs available, using the optional 1450/1460 I/O Expansion Module. Unlimited inputs when
using an Ethernet I/O system.
Discrete
Outputs
2 built-in, high-speed outputs.
8 additional outputs available, using the optional 1450/1460 I/O Expansion Module. Unlimited
outputs when using an Ethernet I/O system.
Status LEDs Power, Network Status, Network Traffic, 2 user configurable.