Instruction manual

Installing In-Sight
®
5000 Series Vision Sensors
35
1. Expected repeatability between cameras. This equates to ~ ±17 pixels on a 640 x 480 resolution camera, ~ ±27 pixels on a
1024 x 768 resolution camera and ~ ±29 pixels on a 1600 x 1200 resolution camera.
Mechanical Material Die-cast aluminum housing.
Finish Clear Chromate/Painted.
Mounting Eight M4 threaded mounting holes (four front and four back).
Dimensions 83.5mm (3.29in) x 124.4mm (4.90in) x 61.4mm (2.42in) with Lens Cover installed.
41.4mm (1.63in) x 124.4mm (4.90in) x 61.4mm (2.42in) without Lens Cover installed.
Weight 350 g (12 oz.) Lens cover installed, without lens.
Environmental Temperature 0°C (32°F) to 45°C (113°F) (Operating),
-30°C (-22°F) to 80°C (176°F) (Storage)
Humidity 95%, non-condensing (Operating and Storage)
Protection IP67 (with appropriate Lens Cover properly installed).
Shock 80 G Shock with 150 gram lens attached per IEC 68-2-27.
Vibration 10 G from 10-500 Hz with 150 gram lens per IEC 68-2-6.
Regulatory Compliance CE, UL, CUL, FCC
Table 5-1: Standard Sensor Specifications (Continued)
Specification
In-Sight
5000
In-Sight
5100
In-Sight
5401
In-Sight
5400C
In-Sight
5403
In-Sight
5400