Instruction manual

Regulations/Comformity
ii
Regulations/Comformity
Declaration of Conformity
Manufacturer: Cognex Corporation
One Vision Drive
Natick, MA 01760 USA
Declares this -marked Machine Vision System Product
Product Number: In-Sight 5000: P/N 800-5840-4; P/N 800-5840-4R (RoHS Compliant)
In-Sight 5100/5110: P/N 800-5870-1; P/N 800-5870-1R (RoHS Compliant)
In-Sight 5400/5410: P/N 800-5855-1; P/N 800-5855-1R (RoHS Compliant)
In-Sight 5400S/5410S: P/N 800-5855-3; P/N 800-5855-3R (RoHS Compliant)
In-Sight 5400C: P/N 800-5837-4; P/N 800-5837-4R (RoHS Compliant)
In-Sight 5400CS: P/N 800-5837-6; P/N 800-5837-6R (RoHS Compliant)
In-Sight 5401/5411: P/N 800-5838-4; P/N 800-5838-4R (RoHS Compliant)
Complies With: 89/336/EEC Electromagnetic Compatibility Directive
Compliance Standards EN 55011:1998 + A1:1999 + A2:2002 Class A
EN 61000-3-2:2000 + A2:2005
EN 61000-3-3:1995 +A1:2001
EN 61000-6-2:2001
European Representative: Cognex France
Immeuble le Patio
104 avenue Albert 1er
92563 Rueil Malmaison
France
Safety
LISTED
UL and CUL Certification marks are present on products
FCC FCC Part 15, Class A
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a
residental area is likely to cause harmful interference in which case the user will
be required to correct the interference at their own expense.