Instruction manual

Installing the Sensor
12
3.1.1 Connecting the In-Sight 5000 Series Components
Install the Lens
Installing a lens allows you to see the sensor acquire live video images. The exact lens focal
length needed depends on the working distance and the field of view required for your
machine vision application.
In-Sight 5000 Series Sensor (does not apply to the remote head sensors):
1. Attach a C-Mount lens to the sensor (Figure 3-1).
Figure 3-1: Install the Lens
In-Sight Remote Head Sensor:
1. Attach a CS-Mount or C-Mount (with 5mm extension ring) lens to the remote head camera.
2. Attach the female M12 connector of the Camera cable to the remote head camera’s male
M12 connector.
NOTE: Refer to Appendix B on page 57 for instructions on installing the remote head camera.