Instruction manual

Setting Up the PC
10
8. Click the "Use the following IP address" radio button (Figure 2-2). The IP Address, Subnet
Mask, Default Gateway, Preferred DNS server and Alternate DNS server fields, which are
grayed-out, become active.
Figure 2-2: Select Network Protocol Dialog
9. Enter an appropriate IP address.
10. Enter an appropriate Subnet Mask. The Subnet Mask defines which part of the system’s IP
Address refers to the network and which part refers to the host. The network part of the IP
address is the same for all hosts on the same subnet, and the remainder is unique to each
host.
11. Click OK to close the Internet Protocol (TCP/IP) Properties dialog.
12. Click OK to close the Local Area Connection Properties dialog, then restart Windows if
prompted to do so.
NOTE:
Consult your network administrator to determine your Preferred DNS server and Alternate
DNS server.