Instruction manual

Setting Up the PC

Verify the In-Sight Software Installation:

1. Verify the In-Sight Explorer software installation by opening the Start menu and clicking

All Programs > Cognex > In-Sight > In-Sight Explorer 3.x.x > In-Sight Explorer 3.x.x.

2. Verify the In-Sight Explorer

Help file installation by opening the Start menu and clicking

All Programs > Cognex > In-Sight > In-Sight Explorer 3.x.x > In-Sight Explorer 3.x.x Help.

2.2 Configuring the PC’s Network Settings (Non-DHCP)

This section provides information on how to configure Microsoft Windows network settings in

order to connect to an In-Sight 5000 series sensor running In-Sight software on a

non-DHCP network. The steps listed below and the example dialogs are specific to

Windows XP Professional.

To Configure Microsoft Windows Network Settings:

1. Click Start, then click on the Control Panel shortcut to open the Control Panel icon group.

2. Click the Network and Internet Connections icon to open the Network and Internet

Connections dialog.

3. Click the Network Connections icon to open the Network Connections dialog.

NOTE:

From the Cognex program group, select In-Sight Explorer 3.x.x Release Notes for current

information about In-Sight software, including new features, fixes and known issues.

Registered In Sight users can download updated versions of In Sight documentation at:

www.cognex.com/support/In-Sight.asp.

NOTE: Consult your network administrator to determine if your network has a DHCP server.