Instruction manual

67 / 69
Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved.
http://www.toshiba-teli.co.jp/index.htm
D4211908A
- Set a range of AE operation
Set the following value to “Teli_ALCExposureTimeMin”, “Teli_ALCExposureTimeMax” register. Setting
value is Float type. AE mode operates at a range of a register value.
You shall set “ExposureTimeMin” < “ExposureTimeMax”.
If you set “ExposureTimeMax” longer than a frame rate period, a frame rate may be slower than the
register setting.
The range of register setting depends on camera model, and camera operation mode.
AE range ExposureTimeMin ExposureTimeMax
Minimum as same as maximum value of Manual mode more than ExposureTimeMin
Maximum less than ExposureTimeMax as same as minimum value of Manual mode
* initial factory setting: ExposureTimeMin = minimum value, ExposureTimeMax = 1 frame
- Set a range of AGC operation
Set the following value to “Teli_ALCGainMin”, “Teli_ALCGainMax” register. Setting value is Float type.
AGC mode operates at a range of a register value.
You shall set “GainMin” < “GainMax”.
AGC range GainMin GainMax
Minimum 0.00[dB] (*) more than GainMin
Maximum less than GainMax 18.00[dB] (*)
* initial factory setting
● Note
ALC operation at Random Trigger Shutter mode is not guaranteed.