Instruction manual

65 / 69
Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved.
http://www.toshiba-teli.co.jp/index.htm
D4211908A
● Setting
- Set photometric area size for measuring luminance
Set the following value to “Teli_ALCPhotometricAreaSize” register. The setting value is Enumeration type.
setting value photometric area size
Full (*) 100% (Full pixel)
Medium 64% (H: 80% x V: 80%)
Small 16% (H: 40% x V: 40%)
* initial factory setting
Fig. ALC Area
- Set a value of the reference luminance
Set the following value to “Teli_ALCReferenceLuminance” registers. These setting values are Integer
type.
An Image luminance at ALC operation converges on a reference luminance.
(at Teli_ALCExposureValue = 0 [eV]).
ReferenceLuminance setting value
Minimum 0
Maximum 255
* initial factory setting = 84