Instruction manual

64 / 69
Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved.
http://www.toshiba-teli.co.jp/index.htm
D4211908A
ALCControl
This section describes ALCControl category for the Bees GigE series.
This camera series provides some registers to adjust the various parameter of ALC operation. When the
camera operates at ALC, AE operation is prior to AGC operation.
Fig. ALC operation
● Registers
Register Visibility Access Description
Teli_ALCPhotometricAreaSize Expert R/W Selects a photometric area size which is used to measure luminance.
Teli_ALCReferenceLuminance Expert R/W Sets a value of the reference luminance when any ALC feature is running.
Teli_ALCExposureValue Expert R/W Sets an EV level when any ALC feature is running.
Teli_ALCTolerance Expert R/W Sets a tolerance range for the reference luminance when any ALC feature is running.
Teli_ALCThrottle Expert R/W Sets a value of feedback fraction when any ALC feature runs.
Teli_ALCLock Expert R/W Sets the lock of ALC operation.
Teli_ALCExposureTimeMin Expert R/W Sets a minimum value of the exposure time when ALC(AE) feature is running.
Teli_ALCExposureTimeMax Expert R/W Sets a maximum value of the exposure time when ALC(AE) feature is running.
Teli_ALCGainMin Expert R/W Sets a minimum value of the gain when ALC(AGC) feature is running.
Teli_ALCGainMax Expert R/W Sets a maximum value of the gain when ALC(AGC) feature is running.