Instruction manual

61 / 69
Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved.
http://www.toshiba-teli.co.jp/index.htm
D4211908A
- Set the SCPD BlockStartDelay
Set the following value to “GevSCPD”, “Teli_BlockStartDelay” registers. These setting values are Integer
type.
Fig. Packet delay
設定値 GevSCPD Teli_BlockStartDelay
Minimum (*) 0 0
Maximum 0xFFFFFFFF 0xFFFFE795
* initial factory setting
● Note