Instruction manual

56 / 69
Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved.
http://www.toshiba-teli.co.jp/index.htm
D4211908A
Gamma
This section describes Gamma correction of AnalogControl category for the Bees GigE series.
This function allows you to apply a gamma correction to the output images.
Fig. Gamma correction
● Registers
Register Visibility Access Description
Gamma Beginner R/W Sets the Gamma correction.
● Setting
- Set Gamma correction
Set the following value to “Gamma” register. Setting value is Float type.
Gamma setting value
Minimum 0.45
Maximum (*) 1.00
* initial factory setting
● Note