Instruction manual

55 / 69
Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved.
http://www.toshiba-teli.co.jp/index.htm
D4211908A
BlackLevel
This section describes BlackLevel control of AnalogControl category for the Bees GigE series.
This control adjusts the black level of the image. It is adjustable from -5% to +25% as white saturation level
is 100%. However, when BlackLevel is lower than 0[%], the image level may not be saturated.
Fig. Black Level
● Registers
Register Visibility Access Description
BlackLevelSelector Beginner R Returns the luminance component of Black Level setting.
BlackLevel Beginner R/W Sets the absolute Black Level.
● Setting
- Set Black Level
Set the following value to “BlackLevel” register. Setting value is Float type.
BlackLevel setting value
Minimum -5.00[%]
Maximum +25.00[%]
* initial factory setting = 0.00[%]
● Note