Instruction manual

53 / 69
Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved.
http://www.toshiba-teli.co.jp/index.htm
D4211908A
Gain
This section describes Gain control of AnalogControl category for the Bees GigE series.
This control adjusts the gain of the image.
Fig. Gain
This camera series provides two kinds of Gain control mode.
- ManualControl (MANUAL) : The Gain value is determined by “Gain” register setting value.
- AutoGainControl (AGC) : The Gain value is adjusted automatically by the photometry of the image.
Registers
Register Visibility Access
Description
GainSelector Beginner R Returns the luminance component of Gain setting.
Gain Beginner R/W Sets the absolute Gain.
GainAuto Beginner R/W Sets activation of AGC mode.