Instruction manual

47 / 69
Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved.
http://www.toshiba-teli.co.jp/index.htm
D4211908A
DigitalIOControl
This section describes DigitalIOControl category for the Bees GigE series.
This camera provides GPIO output selected by the register setting. And the polarity of the signal is able to
switch by the register setting. The following chart shows the specifications of the selectable signals.
Fig. Selectable signals
● Registers
Register Visibility Access Description
LineSelector Expert R/W Selects the Line of I/O connector.
LineMode Expert R Returns the direction of each Line signal.
LineInverter Expert R/W Selects the polarity of GPIO output signal.
LineSource Expert R/W Selects the source of the output signal.
LineFormat Expert R Returns the type of each Line signal.