Instruction manual

46 / 69
Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved.
http://www.toshiba-teli.co.jp/index.htm
D4211908A
● Setting
- Selects exposure control mode
Set the following value to “ExposureMode” register. Setting value is Enumeration type.
setting value Manual exposure mode
Timed (*) “ExposureTime” register control
TriggerWidth Trigger pulse width control
* initial factory setting
In Normal Shutter mode, the exposure time is determined by “ExposureTime” register value regardless of
“ExposureMode” register setting.
- Sets exposure time (timed mode only)
Set the following value to “ExposureTime” register. Setting value is Float type.
Set the exposure time of Normal Shutter mode, and Random Trigger Shutter -Timed mode operation.
Model BG030 BG031 BG080 BG130
ExposureTime (*) 8000 [µs] 8000 [µs] 25000 [µs] 33333 [µs]
ExposureTimeMin 10 [µs] 10 [µs] 30 [µs] 30 [µs]
ExposureTimeMax 16000000 [µs]
* initial factory setting
- Set auto exposure
Set the following value to “ExposureAuto” register. Setting value is Enumeration type.
Select the exposure control.
setting value function
Off (*) Manual Exposure control
On Auto Exposure control
* initial factory setting
● Note
Changing “ExposureMode” register value is invalid during image stream data output.