Instruction manual

36 / 69
Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved.
http://www.toshiba-teli.co.jp/index.htm
D4211908A
● Setting
- Set binning operation
Set the following value to “BinningHorizontal”, “BinningVertical” registers. Setting value is Integer type.
“BinningHorizontal” is the number of horizontal pixel(s) to add. And “BinningVertical” is the number of
vertical pixel(s) to add.
Model BG030 BG031 BG080 BG130
Minimum (*) 1(H)×1(V) 1(H)×1(V) 1(H)×1(V) 1(H)×1(V)
Maximum 2(H)×2(V) 2(H)×2(V) 2(H)×2(V) 2(H)×2(V)
* initial factory setting
● Note
The range of register setting depends on camera model.
Changing “BinningHorizontal”, “BinningVertical” register value effects Scalable registers.
Changing “BinningHorizontal”, “BinningVertical” register value is invalid during image stream data output.