Instruction manual

21 / 69
Copyright © 2012 TOSHIBA TELI CORPORATION, All rights reserved.
http://www.toshiba-teli.co.jp/index.htm
D4211908A
I/O Specification
● Signal Specification
- Trigger Input
Input Circuit : Opto coupler input
Level : Low 0 ~ 0.5V, High 3.3 ~ 24.0V
Polarity : Positive / Negative bipolar (initial factory setting: Negative)
Pulse Width : Minimum 200µs
- GPIO Output
Output Circuit : LINE1 LVTTL output
LINE2 Opto coupler output
Level : LINE1 LVTTL
LINE2 Open collector
Polarity : Positive / Negative bipolar (initial factory setting: Negative)
Signal Source : VD
TIMER0 ACTIVE
EXPOSURE ACTIVE
FRAME ACTIVE
FRAME TRANSFER
FRAME TRIGGER WAIT
Notes of external trigger signal:
Depending on cable length, cable kinds and input current of trigger input line, Random Trigger Shutter operation may not
satisfy timing specification or camera