Instruction manual

14 / 69

http://www.toshiba-teli.co.jp/index.htm

D4211908A

Configuration

The system configuration of this camera series is as follows;

This camera does not include any accessories. Please prepare other equipments separately.

● Camera: This product. (Bees GigE)

● Camera mounting kit CPT8600 (*1): To fix a camera to a tripod; attach this to the bottom of the camera.

● LAN Cable (*2): This cable is used to connect the camera to host equipment.

Ethernet packets (stream and control) are transmitted via this

cable. Please use a LAN cable that supports 1000BASE-T (Cat

5e or over). This product is able to connect a LAN cable that is

equipped with screw lock mechanism. Please use it as needed.

● Network Interface Card (NIC) (*2): This is the interface card to connect to the camera. Usually this

card is installed to expansion slot of host equipment such as PC

etc. Please use 1000BASE-T NIC, supporting Jumbo Frame is

recommended.

● PoE Switching HUB etc. (*2): Use these equipments when you supply power to the camera

from PoE. Please use 1000BASE-T equipments, supporting

Jumbo Frame is recommended.

*1: Optional part. Contact your dealer / distributor for details of option units.

*2: Commercial items.