User manual

Phantom Help File66
© 2010 Vision Research - An AMETEK Company
Get Ready to Record Again
After ensuring the cine file you just downloaded, has been saved to the Type1 Compact Flash
Card, and was not corrupted:
1.
Delete the recorded cine file from the camera's DRAM.
a.
Click the Back selector in the Save Display Screen.
b.
Click the Back selector in the Edit/Save Display Screen.
c.
Click the Delete selector in the PL CST Display Screen, then
d.
Click the Yes selector in the Delete Existing Recording Display Screen.
2.
Go back and follow directions for Capturing Video via LCD and Playback Operations until all
required cine files have been recorded.
Power Down the Camera
1.
From the Power Off Display:
a.
Press Power Off selector.
2.
In the Power Off Confirmation Screen:
a.
Press the Yes selector to power off the camera, or
b.
Press the No selector continue.
CAUTION
Any cine file stored in the camera's memory must be deleted prior to powering down the
camera. Failure to comply with this procedure will cause the camera to run on battery power
until the battery discharges completely.