User manual

Quick Start Guides 63
© 2010 Vision Research - An AMETEK Company
1)
Press directly on the Exposure field to select the field.
2)
Pressing directly on the value a second time increases the value.
3)
Pressing approximately 1/3 the screen height above the value to decrease the value.
4)
Repeat until the desired value is displayed.
2.
Perform a Black Reference Calibration:
a.
Cover the lens with the lens cap.
b.
If not already in the Power Off Display Screen, gently tap on the Phantom logo to access the
Power Off Display Screen.
c.
From the Power Off Display:
1)
Press the BREF (Black Reference) selector.
NOTE
The Black Reference adjustment process should be performed whenever your camera
settings are changed.
3.
Perform a White Balance Adjustment (Color Cameras Only):
a.
Point the camera at a white object.
b.
Align the object to center of the frame.
NOTE
Ensure that the area to calculate the White Balance adjustment on is not saturated and is
completely over a white reference.
c.
If not already in the Power Off Display Screen, gently tap on the Phantom logo to access the
Power Off Display Screen.
d.
In the Power Off Display Screen:
1)
Gently press the WBAL (White Balance) selector.
2)
Examine the display, if you need to perform a White Balance again, simply repeat the
process until you are satisfied.
NOTE
The White Balance adjustment process should be performed whenever lighting conditions
change.
3)
Gently press on the Back selector.
Capture Video via the LCD
1.
Click on the Record selector in the LIVE PRE Display Screen.
2.
Trigger the Phantom Camera via the:
a.
LIVE WTR Display Screen
1)
Press the Trigger selector to supply a soft-trigger signal to the camera.
b.
Power-On/Trigger Button