User manual

Functional Descriptions 397
© 2010 Vision Research - An AMETEK Company
Important System Interactions
Various interactions between the functional block depicted in the video feed operational mode
descriptions require the following rules to be put into place:
· All outputs are set to the same video format.
· Test bars are sent on all outputs at the same time.
· OSD, (On-Screen Display), information can be inserted only on the analog/component out and
SDI-2, (Serial Digital Interface-2).
· In dual-feed modes, only one of the following operations can take place at any given time:
· A Playback from RAM
· A playback from the Phantom CineMag
· Recording or Saving to the Phantom CineMag
· Downloading from the Phantom CineMag via Ethernet
Video-Feed Mode Selection Table
Video-Feed Mode definition is performed in the Phantom Video Play>Pvp Settings dialogue window.
VIDEO- FEED MODE
VIDEO OUTPUTS
4:4:4
ALL OUTPUTS PLAY
SELECTED CINE
SDI2 PLAYS SELECTED
CINE
ANALOG AND SDI1
PLAY LIVE
Single-Feed Mode (4:2:2)
Disabled
Enabled
Disabled
Single Feed Mode with Dual-Link 4:4:4
Enabled
Enabled
Disabled
Dual-Feed Mode
Disabled
Disabled
Enabled
Dual-Feed Mode with 4:4:4
Enabled
Disabled
Enabled