User manual

Phantom Help File368
© 2010 Vision Research - An AMETEK Company
Selectable Range: 0.10 to 10.0
Saturation (Color Cameras Only)
This slide bar is used to adjust the color saturation of the images being displayed. The factory
default value is set to 0 (zero). Moving the slide bar to the left, in the negative direction from 0,
results in the images being displayed with less brilliant color, while moving the slide bar to the
right or in a positive direction from 0 results in the images being displayed with more brilliant
color.
Image above set to: (0 - Default) (-100) (100)
Selectable Range: -100 to 100
Hue (Color Cameras Only)
This slide bar is used to adjust the color hue of the images being displayed. The factory default
value is set to 0 (zero). Moving the slide bar to the left, in the negative direction from 0, results
in the images being displayed with fewer color hues, while moving the slide bar to the right or in
a positive direction from 0 results in the images being displayed with more color hue.
Image above set to: (0 - Default) (-100) (100)
Selectable Range: -180 to 180
White Balance
Move the appropriate slider manually to apply the desired white balance adjustment to the images
displayed in the active Preview or Playback Panel. These slide bars are used to perform a manual
white balance to obtain a white color on an area you know should be white, or, simply to vary the
values of red and blue in the image.
Selectable Range: 0.10 to 10.0