User manual

Functional Descriptions 367

Image above set to: (0 - Default) (-33) (33)

Selectable Range: -100 to 100

Contrast

This slide bar is used to adjust the contrast of monochrome or color images. The factory default

value is set to 1. Moving the slide bar to the left from 1, results in the images being displayed

with less contrast, while moving the slide bar to the right from 1 result in the images being

displayed with greater contrast.

Image above set to: (1.00 - Default) (0.50) (50.00)

Selectable Range: 0 to Infinite

NOTE

By increasing the contrast setting the noise level will increase as well, so only increase as

much as necessary to get a satisfactory image. Being a subjective setting only the user can

determine what satisfactory is.

Gamma

This slide bar is used to adjust the gamma correction of monochrome or color images. The

factory default value is set to q.22. Moving the slide bar to the left from 2.22, results in the

images being displayed with fewer gamma corrections, while moving the slide bar to the right

from 2.22 results in the images being displayed with greater gamma correction.

Image above set to: (2.22 - Default) (0.25) (5.01)