User manual

Phantom Help File316

7.2.4 LIVE TRG Display Screen

The LIVE TRG, (live image preview, camera triggered) mode, is the operational state the camera will

be in when once the camera has detected a valid trigger signal. The camera continues to display a

live image on a monitor or viewfinder screen, just as it did when the camera was in the LIVE PRE or

LIVE WTR modes.

In Loop Mode the camera will stop capturing or writing image data into the camera scrolling memory

buffer locations upon receipt of the trigger signal once the user defined post trigger definition, if any,

has been satisfied.

In R/S (Run/Stop) Mode the camera will immediately stop capturing or writing image data into the

Phantom CineMag Flash memory locations upon the receipt of the trigger signal.

THE ON-SCREEN DISPLAY FIELDS

LIVE TRG Display - Camera Triggered Mode without an attached Phantom CineMag