User manual

Phantom Help File312
© 2010 Vision Research - An AMETEK Company
7.2.3 LIVE WTR/LIVE REC Display Screens
The LIVE WTR / LIVE REC (live image preview, waiting for trigger) mode, is the operational state the
camera will be in once the camera has been instructed to capture or record the image data or frames
to the camera's memory buffer or directly into the Flash memory of an attached Phantom CineMag.
When the camera is set to the Loop Operational Mode, the camera continues to display a live image
on a monitor or viewfinder screen, just as it did when the camera was in the LIVE PRE mode. The
camera will continue to capture or write image data into the camera scrolling memory buffer locations
until a trigger signal has been sent and detected by the camera.
When set to the R/S (Run/Stop) Mode – LIVE REC, the camera displays a live image on a monitor or
viewfinder screen, and starts writing image data directly into the Phantom CineMag linear buffer until
a trigger signal has been sent and detected by the camera.
THE ON-SCREEN DISPLAY FIELDS