User manual

Phantom Help File302

7.2.1 LIVE PRE/LIVE Display Screens

The LIVE PRE, (live image preview, waiting for pretrigger), mode is the operational state the camera

will start up in when it is first powered up. When the camera has a Phantom CineMag attached, and it

is set in Run/Stop mode the camera will be placed into the LIVE mode. What this means is, in either

mode, the camera will display a live image on the monitor or viewfinder screen. However, the camera

is not yet recording any image data or frames to the camera memory buffer or Phantom CineMag.

In this state, the user can:

· View a live image to focus in on the subject.

· Zoom in 1:1 pixel view to assist in targeting the subject.

· Define the recording parameters.

· Determine if any image area is over exposed.

· Examine the recording duration time and the number of frames that will be recorded within the

recording time frame.

THE ON-SCREEN DISPLAY FIELDS

Without an Attached Phantom CineMag

LIVE - Live Preview Mode Display Screen without an attached Phantom CineMag