User manual

Phantom Help File274
© 2010 Vision Research - An AMETEK Company
6.2 Step-by-Step Procedures
This section describes the most common tasks you will use when working with your Phantom Miro
imaging system. It is designed as a "How-To" guide. It is organized roughly in the order that you would
perform the tasks. Most of the topics contain links to background information and other relevant
subjects so you can just pick out the task you need to perform and begin.
The topics in this section are intentionally kept as brief as possible. The focus is on how to do start,
set/change parameters, access various LCD display screens, capture, playback, edit, save and delete
images with your Phantom Miro camera.
NOTE
Not all setting or range settings can be set via the "touch-sensitive" LCD display. The LCD
screen allows the user to select one of several preset values. The Phantom Camera Control
application may be required to achieve the most optimum recording settings and desired
feature set.
Topics will included:
1.
Starting the Phantom Miro camera
2.
Changing the camera settings using your finger or a stylus
3.
Formatting the CompactFlash Card
4.
Placing the camera into the recording mode
5.
Triggering the camera
6.
Viewing the recorded cine
7.
Deleting the recorded cine
8.
Editing the recorded cine
9.
Saving the edited cine
10.
Powering off the camera
11.
Viewing a cine saved on the CompactFlash card
12.
Using the Multicine feature with a Miro camera