User manual

Phantom Miro Control via "Touch-Sensitive" LCD Screens 269

THE DISPLAY FIELD DESCRIPTIONS

Delete All Selector

When selected, the camera deletes all frames or image data stored in all the DRAM partitions.

Live Selector

When selected this selector instructs the camera to display a live image on the touch-sensitive

LCD screen.

Cine Selector and Segment Status Indicator

The status indicator displays the status of memory segment, (see table below for status

descriptions). When selected in the RDY, (Ready), State the camera starts recording image data

to the selected partition and the segment is placed into the WTR, Waiting for Trigger), state.

When select while in the STR, (Stored), state the Play CST Display will open allowing the user to

view, edit, save or delete the recorded image data stored in the memory partition.

NOTE

The number of cine memory segments displayed is determined by the number of partitions

specified in the MultiCine Allocation Display screen.

Status Indicator Table

STATUS

DESCRIPTION

RDY

RDY, (Ready), indicates that the camera is in the Preview, Waiting for pre-

trigger... mode.

The camera memory segment is placed into the Preview, Waiting for pre-

trigger... mode by default.

The Preview, Waiting for pre-trigger.. status means that the memory segment is

capturing only Preview images and is not yet recording image data into it.

WTR

WTR, (Waiting for Trigger), indicates the camera is in the Preview + Recording

cine... Waiting for trigger mode.

It indicates the memory segment is in Capture mode, recording images, using

these images for the Preview, while storing these images in the DRAM partition.

The recording process will stop when a trigger signal is detected and all the

post trigger frames have been stored in the memory buffer segment.