User manual

Phantom Help File260

THE DISPLAY FIELD DESCRIPTIONS

Back Selector

When select the Back Selector returns you to the PLAY CST display.

Displayed Image Number

This field represents the number of the image presently being displayed. If the image was recorded

before a trigger signal had been sent and detected by the camera, the image number will be a

negative number. Post trigger frames, frames recorded after a trigger signal has been detected by

the camera, will be positive numbers.

Memory Buffer Graphical Representation

The graphical representation of the camera's memory buffer, which acts as a memory gauge will

display the Mark In and Mark Out Points as vertical lines. The Displayed Image Reference Point

Indicator, (the up-arrow), represent the present memory location of the image being displayed. The

trigger point, (T), indicates the image or trigger point frame.

Playback Time

The Playback Time represents how much of the total recording duration will be played or saved.

This field is depended on the Mark In and Mark End Points, which are user definable using the Edit/

Save Selector.

Recorded Time

This field indicates the total recording duration time. The duration is determined by the amount of

DRAM in the camera, the pixel bit depth, and the sample rate.

Number of Recorded Frames

This field indicates the total number of frames stored in the camera's DRAM buffer. Just like the

Recorded Time, it is determined by the amount of DRAM in the camera, the pixel bit depth, and the

sample rate.

Set In (Mark In) Point Selector

This field allows you to define a new starting point of the cine file presently stored in the camera's

DRAM buffer.