User manual

Phantom Miro Control via "Touch-Sensitive" LCD Screens 257

THE DISPLAY FIELD DESCRIPTIONS

The majority of the information, displayed on the monitor or built in LCD display, is the same as the

information described under the; "LIVE PRE Display Screen - The On-Screen Display Fields" topic,

except for the following differences:

Camera State Designation

The Phantom logo will be green when the camera is in the PLAY CST mode.

Displayed Image Number

The Displayed Image Number field specifies the number of the image being displayed in the

playback window. Zero represents the first image or the trigger point frame. Pre-trigger frames

will be represented in negative numbers, while post trigger frames will be positive numbers.

Memory Buffer Graphical Representation

The graphical representation of the camera's memory buffer, which acts as a memory gauge will

display the Mark In and a Mark Out Points as vertical lines. The Displayed Image Reference

Point Indicator, (the up-arrow), represent the present memory location of the image being

displayed. The trigger point, (T), indicates the image or trigger point frame.

Playback Time

The Playback Time represents how much of the total recording duration will be played or saved.

This field is depended on the Mark In and Mark End Points which are user definable using the

Edit/Save Selector.

Recorded Time

This field indicates the total recording duration time. The duration is determined by the amount of

DRAM in the camera, the pixel bit depth, and the sample rate.

Number of Recorded Frames

This filed indicates the total number of frames stored in the camera's DRAM buffer. Just like the

Recorded Time, it is determined by the amount of DRAM in the camera, the pixel bit depth, and

the sample rate.

Play Reverse Selector

Decrements the recorded cine file 1 image at a time.