User manual

Phantom Help File246
© 2010 Vision Research - An AMETEK Company
INDICATOR DESCRIPTION
INDICATOR IMAGE
GREEN
YELLOW
RED
Plug (Externally Power)
Battery is fully charged.
Battery is charging.
N/A
Battery (No External
Power)
Battery is well charged.
Battery charge is
getting low.
Battery charge is
critically low,
(approximately 5
minutes left).
CAUTION
If the batter charge indicator turns red, and you have an unsaved cine in memory you should
immediately connect the camera to the power supply and save the cine. If you lose camera
power you will lose any unsaved cine files.
Resolution Setting Selector
This field indicates the active pixel area, (Width x Height), of the sensor defined by the user. It is
also used to set the desired Resolution.
Sample Rate Setting Selector
This field specifies the rate the Phantom camera will capture or record image data, (frames), into
the camera's memory. It is also used to set the desired Sample Rate.
Exposure Setting Selector
This field shows the current, user defined exposure setting of the camera. It is also used to set
the desired camera Exposure.
Image-Based Auto-Trigger Enabled Indicator
The Image-Based Auto-Trigger Enabled Indicator, (AT), will only be displayed when the Image-
Based Auto-Trigger feature has been enabled via the Image-Based Auto-Trigger Display Screen.
Cine Screen Display Selector
This field is used to access the Cine Display window.
Record Selector
This field is used to place the camera into recording mode.