User manual

Phantom Miro Control via "Touch-Sensitive" LCD Screens 245

STEP-BY-STEP PROCEDURE

Camera State Designators

The camera state designation is comprised of two items; the Phantom logo and text display. The

color of the Phantom logo will change based on the state of the camera. The Phantom logo will

be cyan (blue) when the camera is in the LIVE PRE mode. The text, to the right of the Phantom

logo, indicates the present state or operational mode of the camera.

Date and Time

The date and time stamp field indicates; day number/hour:minute:second:microsecond.

Memory Buffer Graphical Representation

This is a graphical representation of the camera's memory buffer. It acts as a memory gauge that

consists of two basic components when the camera is in the LIVE PRE state.

The first component, of the graphical representation is the line which represents the total frames

that can be stored in the camera's buffer. The second component is a "T" on top of the line. The

"T" represents a trigger point that is defined by the user. Any frame that is captured after a trigger

signal is detected by the camera are referred to as Post Trigger frames, and the frames recorded

prior to the trigger signal are referred to as Pre-Triggered frames.

Duration

The Duration field indicates the total length of recording time. The recording duration is based on

the amount of memory in the camera, along with the resolution and sample rate settings. This

field will change based on these variables.

Number of Available Frames

This field indicates how many images or frames will be recorded within the Duration time. This

field will also change based on how the amount of memory in the camera, and how the resolution

and sample rate are set and will change accordingly.

Power Status

Indicates the power status of the camera as follows: