User manual

Phantom Camera Control Application - Help 225

Placing the cursor over a specific point of an analog sample will display the following information:

im (image)

This option indicates the image number the specified reference point of the signal is

associated with.

smp (sample)

This option indicates the sample number the specified reference point for the associated

image.

ch (number)

This option indicates the associated value of the reference point. This value will depend on

what the signal represents.

4.2.6.10 Specify the Time Translation

This pull-down selection list window specifies how the time information is to be displayed. The user

can specify if the time information is to be displayed using the local time zone or UTC, (Universal

Time Code), formally referred to as GMT, (Greenwich Means Time).

STEP-BY-STEP PROCEDURE

Click the Play Control Panel Tab.

Select the cine and click on Frame Info selector.

Check the desired Time Translation.