User manual

Phantom Help File222
© 2010 Vision Research - An AMETEK Company
4.2.6.9 View SAM-3 Signaling
The Phantom Miro3, Miro 3.1, Miro eX4, Miro4, v5.1, v7 series, v9 series, v10, v12 series, v210,
v310, v640, and v710 cameras all provide the ability to gather analog signal information, binary signal
information, or both from one of two Data Translation Data Acquisition Unit models, (the DT-3010 or
DT9802). The gathered signal information is translated and stored for each image and can be
displayed with the captured images during playback.
For details on SAM-3 installation and use, see: Accessories, Peripherals, and Miscellaneous
Features>SAM-3 (Signal Acquisition Module-3), Installations.
STEP-BY-STEP PROCEDURE
Viewing the Sampled Signal Acquisition Information
1.
Click on the Play Control Tab, select the cine, and click the Frame Info selector.
2.
Click the Signals.. button.
The Signal Display dialogue window indicates the number of:
· Binary and Analog Channels sampled.
· Samples per channel captures for each image.
· Images captured.
3.
View the Signal information using any of the following methods:
a.
Clicking on a specific Binary or Analog Signal button to view only that channels sampled
information in a window display.