User manual

Phantom Camera Control Application - Help 197
© 2010 Vision Research - An AMETEK Company
4.2.5.3.9 Define the Ready Signal Ends At:
To instruct the connected-to camera when to toggle off its Ready signal:
STEP-BY-STEP PROCEDURE
1.
Click the Live Control Panel Tab.
2.
Click on Advanced Settings, then
a.
Click the Trigger radial button to instruct the connected-to camera to toggle off its Ready signal
the moment a trigger signal is detected by the camera.
b.
Click the Strobe radial button to instruct the connected-to camera to toggle off its Ready signal
when the selected camera has completed capturing all the images to be recorded.
4.2.5.3.10 Define the Miro/Strobe Pin Is:
To specify if the signal type to be activated on the Auxiliary pin of the capture connector for a
Phantom Miro 3, Miro 3.1, Miro eX4, or Miro 4 camera:
STEP-BY-STEP PROCEDURE
1.
Click the Live Control Panel Tab.
2.
Click on Advanced Settings, then
a.
Click the IrigOut radial button to use the shared Capture cable pin reference as the IRIG Output
signal, or
b.
Click the Strobe radial button to instruct the camera to use the shared Capture cable pin
reference as the Strobe signal.