User manual

Phantom Camera Control Application - Help 189

maximum sample rate for the defined resolution. The TTL input pulse must be connected to

the BNC (Bayonet Neill-Concelman) connector marked Sync on the attached Capture cable

or breakout box.

NOTE

When External Sync Imaging is selected the Cine Settings>Sample Rate field will be

disabled.

Enter the 4-digit serial number of the master clock source camera in the Master Camera Serial

(0=none) field.

Set the Frame Delay, of all slave cameras, cameras accepting the master cameras provided

clock, to at least 1µs greater than that of the master camera.

NOTE

The 4-digit serial number of a camera can be found on the side of each Phantom camera.

Ensure the Exposure time setting, of the Externally timed cameras, does not exceed the

maximum Exposure time of the master clock source camera.

Ensure that the Post Trigger value of the master clock source camera is set to a value that is

one frame greater than the Post Trigger setting of the Externally timed cameras.