User manual

Phantom Camera Control Application - Help 185
© 2010 Vision Research - An AMETEK Company
4.2.5.3.2 Define the CineMag Option
Phantom cameras that support a Phantom CineMag can operate in one of two operational mode,
including:
Loop
In Loop Mode the Phantom camera stores, the recorded image data into the camera's DRAM
buffer. In this mode, the Phantom CineMag operates like any other Flash card, after a cine file,
(image data), is recorded into the camera's DRAM frame buffer, the end-user manually saves the
image data it into the Phantom CineMag by initiating the Save to Flash command window, which
can be accessed via the Cine Pull-down Menu.
NOTE
This mode supports recording up to the maximum Sample rate.
R/S (Run/Stop)
In Run/Stop Mode the image data is recorded directly into the Phantom CineMag. For example, a
Phantom HD will store the image data at a rate up to 450fps at the HD resolution of 2048 x 1080.
STEP-BY-STEP PROCEDURE
1.
Click the Live Control Panel Tab.
2.
Click on Advanced Settings.
3.
Enable, (check), the CineMag>Direct recording to CineMag feature to write each image data
directly into the attached Phantom CineMag too.