User manual

Phantom Camera Control Application - Help 183
© 2010 Vision Research - An AMETEK Company
Specify the Post Trigger Value
1.
Click the Live Control Panel Tab.
2.
Click on Cine Settings.
3.
Specify the selected Phantom camera's Post Trigger parameter:
a.
Click the down-arrow to the right of the Post Trigger entry window and select a predefined
Post Trigger value from the pull-down selection list, or
b.
Slide the Trigger Position slider to the right to reduce the number of Post Trigger frames,
or to the left to increase the number of Post Trigger Frames, or
c.
If the desired Post Trigger value is not listed, enter the number of Post Trigger frames
required. The Phantom Camera Control application allows the end-user to enter any Post
Trigger value between the minimum and the maximum value displayed in the drop down
list.