User manual

Phantom Camera Control Application - Help 181
© 2010 Vision Research - An AMETEK Company
4.2.5.2.5 Low Light
Using the Low-Light feature automatically sets the camera exposure to a pre-defined level. This
exposure level is based on the camera's resolution and sample rate settings.
STEP-BY-STEP PROCEDURE
To Turn On the Low Light Feature
1.
Click the Live Control Panel Tab.
2.
Click on Cine Settings.
3.
Click on the Low Light button.
RESULT: The Sample Rate of the camera will decrease significantly from it original setting.
To Turn Off the Low Light Feature
1.
Click the Live Control Panel Tab.
2.
Click on Cine Settings.
3.
Click on the Undo Low Light button.
RESULT: The Sample Rate of the camera will increase back to its original user-define setting.