User manual

Phantom Camera Control Application - Help 179

NOTE

The range of valid Exposure Times is dependent upon the defined Sample Rate.

STEP-BY-STEP PROCEDURE

Click the Live Control Panel Tab.

Click on Cine Settings.

Specify the selected Phantom camera's Exposure Time parameter:

Click the down-arrow to the right of the Exposure Time entry window and select a predefined

Exposure Time from the pull-down selection list, alternately

If the desired exposure time is not listed, enter the exposure time required. The Phantom

Camera Control application allows the user to enter any exposure time between the minimum

and maximum times displayed in the drop down list, in 1µs increments, percentage, or

degrees.

For details on changing the Exposure Time Unit to µs, degree, or percent, see, Step-by-Step

Procedures>Menubar Procedures>Tool Menu Procedures>Preferences - Phantom Camera

Control Preferences.

RESULT: The Phantom Camera Control application will set the Exposure Time in the Exposure Time

entry window.