User manual

Phantom Camera Control Application - Help 177

4.2.5.2 Cine Settings

This topic describes the Step-by-Step procedures that can be performed Cine Settings selector.

4.2.5.2.1 Define the Resolution

The Resolution setting allows the user to change the dimensions, width to the height ratio, of the

image to be recorded. Each type of camera has a specific maximum resolution. Changing the

Resolution settings to match the dimensions of the subject of interest allows the user the option of

recording at higher sample rates, or longer recording times at the same sample rate.

Using the CAR (Continuous Adjustable Resolution) feature, provides for resolution adjustments

between the minimum and maximum drop-down list values as follows:

· Phantom 65 in 4096 x 8 pixel increments

· Phantom HD Gold, HD in 2048 x 8 pixel increments

· Phantom v710, v640, v310, v210, and v12 Series in 128 x 8 pixel increments

· Phantom v10 and v9.1 in 96 x 8 pixel increments

· Phantom v9.0 in 48 x 8 pixel increments

· Phantom v7.3 in 32 x 8 pixel increments

· Phantom v7.2, v7.1, v7.0, v6.2e, v4.3, and v4.2 in 16 x 8 pixel increments

· Phantom v5.1 in 64 x 4 pixel increments

· Phantom v6.0, v5.0, v4.1, and v4.0 in 8 x 8 pixel increments

· Phantom Miro eX4, Miro 4, Miro eX3, Miro 3, Miro Airborne, Miro eX2, Miro 2 in 32 x 8 pixel

NOTE

Reducing the image resolution, (width to the height ratio), will provide faster recording speeds,

(Sample Rates), or longer recording times, (Duration).

The Resolution will also determine the available Sample Rates.

STEP-BY-STEP PROCEDURE

Click the Live Control Panel Tab.

Click on Cine Settings.

Specify the selected Phantom camera's Resolution parameter:

Click the down-arrow to the right of the Resolution entry window and select a predefined

Resolution from the pull-down selection list, or

To use a resolution that is not displayed within the list simply enter the desired Resolution,

(width x height).

RESULT: The Phantom Camera Control application will display the closest available Resolution

allowed in the Resolution entry window.