User manual

Phantom Help File176
© 2010 Vision Research - An AMETEK Company
4.2.5.1.7 Define the Automatic Lens Control
The Lens Control option allows the end-user to control an attached lens remotely when used with the
Automatic Lens Control Mount. The end user can adjust/set:
· Aperture (f-stop)
· Focus
STEP-BY-STEP PROCEDURE
1.
Click the Live Control Panel Tab.
2.
Click on Camera Settings.
3.
Click the pull-down-arrow to the right of the Aperture entry field, then
4.
Select the desired f-stop for the attached, lens.
5.
Adjust the lens focus by:
a.
Click the +, (plus), button to focus the lens to its limit location respectively corresponding to
infinity, or
b.
Click the -, (minus) button to focus to the minimum-focusing-point of the lens, alternately
c.
Slide the Lens Control Slider upward, (Fast+), to focus the lens to its limit location respectively
corresponding to infinity, or
d.
Slide it downward, (Fast-) to focus to the minimum-focusing-point of the lens.