User manual

Phantom Camera Control Application - Help 175

4.2.5.1.6 Specify the Cine Memory Partitions

The MultiCine feature allows the end-user to:

· Specify the number of memory segments, or partitions, a camera's DRAM or attached Phantom

CineMag's memory will be evenly divided into.

· Define a unique configuration profile for each of the memory segments.

· View how the memory segments are configured.

· Select which memory segment to capture or record image data into.

· Delete the recorded cine file, (image data), stored in a specific memory segment, without deleting

recorded image data in any of the other memory segments, to free up that memory to perform

another capture.

NOTE

Each memory segment, from a MultiCine recording, can have its own acquisition parameters.

The MultiCine feature is not available with the Phantom v4.1, v4.2, v5.0, v6.0, or v6.1 camera

models.

STEP-BY-STEP PROCEDURE

Click the Live Control Panel Tab.

Click on Camera Settings.

Click the down-arrow to the right of the MultiCine>Partitions entry window, then

Select the number of DRAM memory segments desired.

In the 'Changing partitions will erase all cines from camera volatile memory, Proceed?'

confirmation window:

Click the OK button to partition the selected Phantom camera's DRAM, alternately

Click the Cancel button to leave the selected camera's DRAM as is.

RESULT: Each partition of the selected Phantom camera's DRAM will be allocated with an equal

percentage of the total memory buffer.