User manual

Phantom Help File160
© 2010 Vision Research - An AMETEK Company
Image Number - Specifies the number of the image, starting with the first image in
the cine.
Image Number From Zero - Specifies the number of the image, starting from the first
image in the cine, after the trigger.
Camera Version - Indicates the camera model used to record the cine.
Acquired Resolution - Displays the width x height the cine was recorded at.
Rate - Indicates the Frame Rate setting at the time the images were recorded.
Exposure - Indicates the exposure setting of the image being displayed.
EDR Exposure - Indicates the Extreme Dynamic Range Exposure time setting at the
time the images were recorded.
First and Last Image - Indicates the first and last image number of the images
contained within the edited cine file.
Duration - Indicates the duration of the file.
Signals - Displays the values of all signals for each frame, captured via an attached
Data Acquisition Unit.
Range Data - Displays range data information supplied by a tracking mount system to
the camera via the Range Data connector.
Description - Indicates the information entered into the Description field in the Play
Panel > Cine Info.
NOTE
All the optional lines, if selected, will also be displayed below the cine.
Military - When selected the user may define the following Outside Image fields, that will
be displayed outside the recorded cine area, along with the Common Options, and
Optional Lines, described above, along with any Inside Image information options
selected.
Header - This editable field will be displayed just above the recorded cine.
Footer - This editable field will be displayed just below the recorded cine.
NOTE
All the optional lines, if selected, will also be displayed to the right of the cine.
Car Engine - When selected the user may define the following Outside Image fields,
that will be displayed outside and below the recorded cine area, along with the Common
Options, and Optional Lines, described above, along with any Inside Image information
options selected.
Engine Speed
Spark Frame
Spark Crank Angle (deg)
Reset Angle (deg)
Cyl. Pressure (bar)
Text
NOTE
All the optional lines, if selected, will be displayed above the cine.