User manual

Phantom Camera Control Application - Help 137
© 2010 Vision Research - An AMETEK Company
parameters were copied to all cameras.
5.
Click the OK to close the informational message window.
6.
Verify the settings were copied to all other connected to cameras:
a.
Click on the Camera pull-down selection list, then
b.
Select a connect Phantom camera, from the list.
c.
Verify the parameter settings are correct.
NOTE
This feature changes all the Live Control Panel setting to the camera, including the
Exposure Time setting. You may need to set this parameter individually for each camera
depending on the lighting conditions and the placement of the camera.