User manual

Phantom Help File136

4.2.1.2.2 Copy Parameters To..

The Copy Parameters to.. command is used to copy all of the active Live Control Panel settings to:

All cines in this camera

This command instructs the camera to change the settings, in all memory partitions, to match the

settings currently displayed in the Live Control Panel, and will only be available when the selected

Phantom camera has been configured to use the MultiCine feature.

All cameras

This command instructs set all the Phantom cameras, in the camera network, to change their

Live Control Panel settings to match the setting of the active camera, and will only be available in

a multi-Phantom camera, environment.

STEP-BY-STEP PROCEDURES

All cines in this camera

With the camera set to use the MultiCine feature, click on the Camera menu in the menu bar.

Select the Copy Parameters to.. option.

Select the All cines in this camera command.

Click the OK button, in the Copy? dialogue window, to copy cine or preview parameters over to

all the other partitions in this camera.

RESULT: An information message window will appear, indicating that the active Live Control Panel

parameters were either:

· Copied to all cine partitions if the cine partitions are free, no image data stored in them, or

· Have not been overwritten, for a particular cine partition, because a cine file, image data, has

been stored into that memory segment. A second message will then be displayed indicating

that all other cine partitions have been overwritten with the active Live Control Panel settings.

Click the OK to close the informational message window.

RESULT: All free cine partitions will now be set with the new parameter setting specified during the

Copy process.

All cameras

With the camera being used in a network, multi-camera, environment, click on the Camera

menu in the menu bar.

Select the Copy Properties to.. option.

Select the All cameras command.

Click the OK button, in the Copy? dialogue window, to copy active Phantom camera's Live

Control Panel parameters over to all the other connected to Phantom cameras.

RESULT: An information message window will appear, indicating that the active Live Control Panel