User manual

Phantom Help File128
© 2010 Vision Research - An AMETEK Company
displayed.
From Image 0 - When selected the time difference from when the image being
displayed was recorded and the moment the first full image after a trigger was
recorded will be displayed.
From First Image - When selected the time difference from when the image being
displayed was recorded and the moment the first image of the cine was recorded
will be displayed.
File Name - Displays the name of the file specified during the save process.
Image Number - Specifies the number of the image, starting with the first image in
the cine.
Image Number From Zero - Specifies the number of the image, starting from the first
image in the cine, after the trigger.
Camera Version - Indicates the camera model used to record the cine.
Acquired Resolution - Displays the width x height the cine was recorded at.
Rate - Indicates the Frame Rate setting at the time the images were recorded.
Exposure - Indicates the exposure setting for the image being displayed.
EDR Exposure - Indicates the Extreme Dynamic Range Exposure time setting at the time
the images were recorded.
First and Last Image - Indicates the first and last image number of the images contained
within the edited cine file.
Duration - Indicates the duration of the file.
Signals - Displays the values of all signals for each frame, captured via an attached Data
Acquisition Unit.
Range Data - Displays range data information supplied by a tracking mount system to the
camera via the Range Data connector.
Description - Indicates the information entered into the Description field in the Play Panel
> Cine Info.
NOTE
All the optional lines, if selected, will also be displayed below the cine.
Military - When selected the user may define the following Outside Image fields, that will
be displayed outside the recorded cine area, along with the Common Options, and
Optional Lines, described above, and any Inside Image information options selected.
Header - This editable field will be displayed just above the recorded cine.
Footer - This editable field will be displayed just below the recorded cine.
NOTE
All the optional lines, if selected, will also be displayed to the right of the cine.
Car Engine - When selected the user may define the following Outside Image fields, that
will be displayed outside and below the recorded cine area, along with the Common
Options, and Optional Lines, described above, and any Inside Image information options
selected.
Engine Speed
Spark Frame