User manual

Phantom Help File126

will be displayed outside and below the recorded cine area, along with the Common

Options, and Optional Lines, described above, and any Inside Image information options

selected.

Engine Speed

Spark Frame

Spark Crank Angle (deg)

Reset Angle (deg)

Cyl. Pressure (bar)

Text

NOTE

All the optional lines, if selected, will be displayed above the cine.

Inside Image:

time stamp - Where each image is tagged with the absolute date and time the image was

recorded. Enabling this option will display the time stamp information when the file is

played back.

From Trigger - When this option is selected the exact time the image was recorded from

the time the trigger input was detected will be displayed.

Draw Signals - When available the user can define which analog signal sample

information will be displayed in the corners of each image, up to four signals, (only

available if the cine file was captured using an attached Data Acquisition Unit and SAM-3

for signal Acquisitions).

Samples per Stamp - Used to display the acquired selected signal samples on each

image . The Samples per Stamp value is the number of samples to be displayed in the

small corner windows representing the acquired signal. Its minimum value should be the

value of "Samples per image" defined in Live Panel>Advanced Settings>Signals.

NOTE

The information displayed inside the image cannot be removed.

Specify the Lossy Compression Quality. (This option is only available when saving as a Cine

JPEG, LEAD, LEAD JFIF, LEAD JTIF, JPEG, or JTIF file type.)

Click the Save button to save the cine file.

RESULT: The Preview Panel displays a Saving Cine.. message , and the Preview Panel Status

Bar displays a Saving.. progress indicator. The files will be saved with the following name

convention: <root_filename>_<camera_name><camera_model><camera_serial_number><Cine#.

ext>