User manual

Phantom Camera Control Application - Help 121

Time Stamp

Where each image is tagged with the absolute date and time the image was

recorded. Enabling this option will display the time stamp information when the file is

played back.

From Trigger

When this option is selected the exact time the image was recorded from the time the

trigger input was detected will be displayed.

Draw Signals

When available the user can define which analog signal sample information will be

displayed in the corners of each image, up to four signals, (only available if the cine

file was captured using an attached Data Acquisition Unit and SAM-3 for signal

Acquisitions).

Samples per Stamp

Used to display the acquired selected signal samples on each image . The Samples

per Stamp value is the number of samples to be displayed in the small corner

windows representing the acquired signal. Its minimum value should be the value of

"Samples per image" defined in Live Panel>Advanced Settings>Signals.

NOTE

The information displayed inside the image cannot be removed.

Specify the Lossy Compression Quality. (This option is only available when saving as a Cine

JPEG, LEAD, LEAD JFIF, LEAD JTIF, JPEG, or JTIF file type.)

Define the Multihead Options... (Phantom v6 Series camera models only.)

Click the Multi-Head Options button

When saving cine files from a Phantom v6 camera the system will, by default, save the

images from all four imaging heads into a single cine file. To save a unique cine file for

each of the Phantom v6 imaging heads:

Select the camera Head or Heads to save in the Multihead Options dialogue window,

then

ii.

Click the OK button

Click the Save button to save the cine file.

RESULT: The Preview Panel will display the Saving Cines..message, and the Preview Panel Status

Bar will display a Saving to Flash.. progress indicator.